A trailer holds a setpoint. It does not prove one. Those are different obligations.
This is educational content, not compliance advice. Food safety requirements are set by your local health jurisdiction and by your own food safety plan. Where the two differ from anything written here, they govern. Confirm your obligations with your health department.
The most common misunderstanding we encounter is that renting a refrigerated trailer solves a documentation problem. It solves a temperature problem. The record is still yours to keep, and an inspector will ask for it whether or not the equipment was rented.
Being precise about this prevents an unpleasant conversation later.
| Holds a setpoint | Yes. Between −10°F and 50°F, set on delivery and maintained by the unit. |
|---|---|
| Pulls a load down | Yes, given time. An empty unit reaches setpoint in hours, not minutes. |
| Records temperature over time | No. There is no logger and no audit trail. |
| Alarms if something fails | No. A failed unit is discovered by a person opening the door. |
| Replaces your food safety plan | No. It is a cold source, not a control system. |
Almost all temperature regulation reduces to these, whatever the local wording.
The range in which bacteria multiply most readily is generally described as between 41°F and 135°F in US food code practice. Below 41°F growth slows; above 135°F it is largely suppressed. This is why holding cold food at 34°F to 40°F gives margin — the target is not 41°F, it is comfortably under it.
Where temperature cannot be maintained, time can be used instead. The familiar framework allows a limited period — commonly four hours — before product must be discarded, with a longer window available under stricter conditions and written procedures. Your jurisdiction defines the exact terms; do not rely on a number from a website, including this one.
The practical consequence for a trailer: if the unit fails, you are in a time-controlled situation whether or not you planned to be. What protects the product is noticing, recording, and acting — not the fact that the equipment is normally reliable.
Four elements. A clipboard with times and numbers is enough, if it has all four.
Air temperature from a handheld unit is weak evidence on its own; a probe reading in the product is stronger. Record which one you used and where you took it, because “38°F” means nothing without that.
At minimum, at the start and end of each shift, plus every time product enters or leaves. More frequent readings around delivery and loading, because that is when the box is open and the load is changing.
A name and initials, not a department. A record nobody is willing to sign is a record that will not be trusted.
This is the element most logs omit, and the one an inspector looks for. An excursion with a documented response — product moved, unit checked, supplier called — reads very differently from an excursion with nothing beside it.
Three situations where a clipboard is not sufficient.
When your plan requires continuous records. Some operations and some customers specify uninterrupted monitoring rather than periodic checks. If that is written into your arrangements, a standalone logger is the only thing that satisfies it — not the trailer, and not a more diligent clipboard.
When the product value justifies it. Pharmaceuticals, high-value protein, a load whose loss would be a genuine event. The cost of a logger is trivial against the cost of not being able to show what happened.
When nobody is on site. An unattended trailer that fails overnight is discovered in the morning, whatever the log says. A logger with an alarm at least turns a discovery into a notification.
What we can do is supply a trailer that holds setpoint and, if a unit fails, replace it. What we cannot do is be your monitoring system. Planning those as two separate things is the difference between a documented operation and an optimistic one.
We can tell you what the equipment does. Your health department tells you what you must record.
Ask Us